10mm Cylindrical Shank Adapter For 10mm w/Flat CNC

$ 32.40
Series 6381 This drill bit shank adapter is used when CNC applications call for a drill bit with a set screw flat on the shank to be used in a collet/tool holder setup. The flat land on a drill shank will interfere with concentrically clamping the shank inside the collet (see photo below), and contributes to oval or irregular holes,  deflection and other problems.  This adapter is an interface between collet and drill bit, featuring a cylindrical shank for accurate collet mounting, and accepting the drill bit for set-screw tightening on the other end. As shown below, this adapter serves as an interface between collet and drill bit.

Description

(51124A-0030-F) Bullseye Glascadia Burnt Orange Opalescent with Steel Blue Opal Drizzle 90 C.O.E. Glass

Limited Edition

All stated dimensions of sheet glass are approximate. Because of the unique process and conditions of manufacturing art glass, the sheets are not perfectly square, nor are the sizes exact. Unless noted otherwise all sheet glass is approximately 1/8″ thick.

*Note On Image Accuracy: While glass is notoriously difficult to capture well in a photograph, great care is given to present glass as true-to-life as possible. Computer monitors vary widely and may not reliably portray the glass or its color.

Receive the latest product news & promotions